Preview Product
ON SALE

Aeotec Dual Nano Switch

₱6,000 ₱5,100

15% OFF

In stock

Brand: Aeotec

Control 2 times the power loads instead of 1.

Convert any dual-switch or dual-outlet into a smart switch or outlet by connecting them to Z-Wave for wireless control and automation. Aeotec Dual Nano Switch allows you to automate, schedule and manually control 2 of your home’s neighbouring wall switches or power outlets using Z-Wave gateways, hubs and apps. Once connected to a Z-Wave system it offers on / off scheduling, manual control, and intelligent automation. Super small, only 1.58 inches wide and 0.76 inches deep, Dual Nano Switch is invisibly installed behind an existing switch or socket; using it allows you to make any switch or socket smart without having to replace it. This invisible method of installation works with a neutral wiring and allows for Dual Nano Switch to be controlled both by Z-Wave and the existing switch. Utilizing Z-Wave Plus and Aeotec’s Gen5 technology, Dual Nano Switch is compatible with certified Z-Wave gateways, hubs and software and can be controlled with Amazon Alexa when used with an Alexa compatible Z-Wave hub or gateway.

  • Convert any two switches or outlets into Z-Wave connected ones for wireless control and automation. Existing wall switches or power outlets continue to operate as normal.
  • Super small; invisibly installs behind your existing wall switch or power socket. Measures only 1.58 x 1.69 x 0.76 inches
  • Universally compatible: can be controlled via 2-state (flip/flop) external/manual switch, momentary push button or the 3-way switch.
  • Z-Wave Plus certified for quicker response time and best wireless range. 

(Smart Home Hub required / Neutral Wire required)

  • Name: Dual Nano Switch
  • Model number: ZW132 (with energy reading)
  • Product Weight: 35 g
  • Total Package Weight: 60 g
  • Product Dimensions: 44.5 x 41 x 20 mm
  • Package Dimensions: 73 x 73 x 30 mm
  • Power input: 120 to 240VAC, 50/60Hz.
  • Repeater: Yes
  • Beaming: Yes
  • AES 128 Security: Yes
  • Power Input:
Version Input/Output Working Band
PH 230V 50Hz, Max: 10A 868.42MHz

 

  • All versions are compatible to these voltage levels and max current:
  • 110/120VAC 50/60Hz (1 phase only) or 220-240VAC 50/60Hz (1 phase only)
  • Resistive max: 5A max per output.
  • Capacitive max: 1.75A per output (max 3.5A total).
  • Inductive max: 2.5A Max per output.
  • Max standby power: <0.8W.
  • Energy Measurement Input Voltage Required (ZW132 only): 90 - 240VAC required to power and allow energy reading.
  • Power measurement accuracy (ZW132 only): + or - 3W.
  • Surge Protection: 1kV voltage spike for 8-20us
  • Dimensions: 44.5 x 41 x 20 mm (1.8 x 1.6 x 0.8 in)
  • Accepted Input for L:
  • 90 - 240VAC @ 50/60Hz
  • 24VDC 100mA
  • IN/OUT terminal isolation from L/N:
  • ZW132 (with metering): No.
  • ZW140 (without metering): Yes.
  • External Switch Voltage Requirements:
  • S1 and S2 inputs the voltage inputted between L and N terminals.
  • L and N inputted with 90 - 240VAC, then the external switch must also be powered by 90 - 240VAC to S1 or S2 connection.
  • L and N inputted with 24VDC, then the external switch must also be powered by 24VDC to S1 or S2 connection.
  • Environment of Installation:
  • Must be installed indoors
  • Should be located in a dry location
  • Should be installed in a fire resistant plastic gangbox.
  • Should not be installed in a metal gangbox for optimization of Z-Wave range.
  • Operating temperature:
  • 0℃ to 40℃
  • 32 ℉ to  104 ℉ .
  • Relative humidity: 8% to 80%.
  • Operating distance:
  • Up to 492 feet outdoors.
  • Up to 150 metres outdoors.