Aeotec Dual Nano Switch
₱6,000
₱5,100
In stock
Brand: Aeotec
Control 2 times the power loads instead of 1.
Convert any dual-switch or dual-outlet into a smart switch or outlet by connecting them to Z-Wave for wireless control and automation. Aeotec Dual Nano Switch allows you to automate, schedule and manually control 2 of your home’s neighbouring wall switches or power outlets using Z-Wave gateways, hubs and apps. Once connected to a Z-Wave system it offers on / off scheduling, manual control, and intelligent automation. Super small, only 1.58 inches wide and 0.76 inches deep, Dual Nano Switch is invisibly installed behind an existing switch or socket; using it allows you to make any switch or socket smart without having to replace it. This invisible method of installation works with a neutral wiring and allows for Dual Nano Switch to be controlled both by Z-Wave and the existing switch. Utilizing Z-Wave Plus and Aeotec’s Gen5 technology, Dual Nano Switch is compatible with certified Z-Wave gateways, hubs and software and can be controlled with Amazon Alexa when used with an Alexa compatible Z-Wave hub or gateway.
- Convert any two switches or outlets into Z-Wave connected ones for wireless control and automation. Existing wall switches or power outlets continue to operate as normal.
- Super small; invisibly installs behind your existing wall switch or power socket. Measures only 1.58 x 1.69 x 0.76 inches
- Universally compatible: can be controlled via 2-state (flip/flop) external/manual switch, momentary push button or the 3-way switch.
- Z-Wave Plus certified for quicker response time and best wireless range.
(Smart Home Hub required / Neutral Wire required)
- Name: Dual Nano Switch
- Model number: ZW132 (with energy reading)
- Product Weight: 35 g
- Total Package Weight: 60 g
- Product Dimensions: 44.5 x 41 x 20 mm
- Package Dimensions: 73 x 73 x 30 mm
- Power input: 120 to 240VAC, 50/60Hz.
- Repeater: Yes
- Beaming: Yes
- AES 128 Security: Yes
- Power Input:
| Version | Input/Output | Working Band |
| PH | 230V 50Hz, Max: 10A | 868.42MHz |
- All versions are compatible to these voltage levels and max current:
- 110/120VAC 50/60Hz (1 phase only) or 220-240VAC 50/60Hz (1 phase only)
- Resistive max: 5A max per output.
- Capacitive max: 1.75A per output (max 3.5A total).
- Inductive max: 2.5A Max per output.
- Max standby power: <0.8W.
- Energy Measurement Input Voltage Required (ZW132 only): 90 - 240VAC required to power and allow energy reading.
- Power measurement accuracy (ZW132 only): + or - 3W.
- Surge Protection: 1kV voltage spike for 8-20us
- Dimensions: 44.5 x 41 x 20 mm (1.8 x 1.6 x 0.8 in)
- Accepted Input for L:
- 90 - 240VAC @ 50/60Hz
- 24VDC 100mA
- IN/OUT terminal isolation from L/N:
- ZW132 (with metering): No.
- ZW140 (without metering): Yes.
- External Switch Voltage Requirements:
- S1 and S2 inputs the voltage inputted between L and N terminals.
- L and N inputted with 90 - 240VAC, then the external switch must also be powered by 90 - 240VAC to S1 or S2 connection.
- L and N inputted with 24VDC, then the external switch must also be powered by 24VDC to S1 or S2 connection.
- Environment of Installation:
- Must be installed indoors
- Should be located in a dry location
- Should be installed in a fire resistant plastic gangbox.
- Should not be installed in a metal gangbox for optimization of Z-Wave range.
- Operating temperature:
- 0℃ to 40℃
- 32 ℉ to 104 ℉ .
- Relative humidity: 8% to 80%.
- Operating distance:
- Up to 492 feet outdoors.
- Up to 150 metres outdoors.
